The 4253-1 electromagnetic drill motor features 6.2 amps and a 1/2 in. chuck turning at 600 rpm. This motor is best used on the 4202 fixed position base. Light weight and ample power make this a good choice for smaller holes into steel. The 4253-1 has a Tap Capacity of 5/8 inch -18 and develops up to 1650 pounds of Drill point pressure.
1/2 in. capacity, 6.2-Amp motor, 600 RPM
1/2 inch keyed chuck
Taps up to 5/8 inch -18 threaded hole. 5/8-11 and 1/2-13 taps not recommended
Develops up to 1650 lbs. of drill point pressure with a 1 in. steel plate