For remote drilling in metal, the 4270-21 is a great choice. It can drill up to 1 1/2in. diameter holes through 2in. thick steel with annular cutters, or 1/2in. diameter holes 4 1/4in. deep with twist drill bits. The tool is set up to accept standard 3/4in. Weldon shank cutters (not included). U.S.A.
- Powerful 9.0 Amp motor
- The strong two-coil magnet provides 2300 lbs. of deadlift force on 1in. thick steel
- The simple two-button control panel is located on the back, away from feed handle obstruction
- The feed handle can be conveniently relocated to the opposite side without the use of tools
- High-strength two-coil magnet
- User-friendly two-button control panel
- Left/right tool-less feed handle mount
- Cutters and chuck adapter not included
- (1) Drill press
- (1) Lubricant
- (1) Hand pump
- (1) Safety strap
- (1) Impact-resistant carry case
HP | 1.1 |
Chuck Size (in.) | 3/4 |
Manufacturer Warranty | 5 year limited warranty |
Ship Weight | 37.0 lbs |
Item# | M0104 |
|
|
Shop for Milwaukee
|
| Manufactured in America |
