The SHOP FOX® Deluxe Milling Machine is fortified with a quick-tilt headstock for horizontal milling, 1 HP brushless motor, a multi-function digital depth scale on the quill, push-button speed control and digital spindle tachometer. The quick reversing tapping feature also makes hole threading simple. Just put the machine in "tapping mode," start the tap, and when the thread is completed, push the button at the end of the rack levers and the spindle reverses, immediately withdrawing the tap from the hole. The back-lit digital tachometer tells you the precise spindle speed for matching tooling and material. Item is on backorder until August 31st.
- Over 14in. of headstock movement
- Dovetail column
- Digital spindle scale reads metric or inches, zero set, on/off
- Head tilts 90°
- Push-button variable speed
- Back-lit digital speed display
- Reversing buttons on the rack handles for tapping
- Coolant trough
- Front-mounted fine feed knob
- Push-button motor control for forward, reverse, tapping and off
- Front-mounted E-stop button
- See-through chip guard with safety switch
- Brushless DC motor w/ step-up transformer, 110V operation
- Spindle taper: R-8
- Spindle travel: 2 7/8in.
- Swing: 18in.
- Max. distance spindle to table: 14 3/4in.
- X and Y handwheel calibration: 0.001in.
- Z handwheel calibration: 0.005in.
- T-Slots: 3 @ 1 11/16in. centers, 3/8in. studs
- Table size: 6 1/4in. x 21 5/8in.
- Table travel (longitudinal): 15 7/8in.
- Table travel (cross): 5 3/4in.
- Headstock travel: 14 7/8in.
- Drilling capacity: 1in.
- Max. face cutter diameter: 2in.
- Quill diameter: 60mm
- Variable speed: 100 - 1750 RPM
- (1) Milling machine
- (1) 5/8in. drill chuck and arbor
- (2) T-nuts
- (2) Open end combo wrenches
- (4) Allen® wrenches
- Extra drive belt
- (4) Leveling feet
HP | 1 |
Volts | 220 |
Speed (RPM) | 3,500 |
Draw Bar | 7/16in. x 20 TPI |
Swing | 18in. |
Drilling Capacity (in.) | 1 |
Chuck Size (in.) | R - 8 |
Max. Spindle Distance (in.) | 14 3/4 |
Worktable L x W (in.) | 6 1/4 x 21 5/8 |
Light Included | No |
Stand Included | No |
Dimensions L x W x H (in.) | 27 x 30 x 33 3/4 |
Manufacturer Warranty | 24 months limited parts / No labor |
Ship Weight | 416.0 lbs |
Item# | 426419 |
